• Approx USB 3.0 Gigabit Network Adapter

    This adapter will allow you to add an additional RJ-45 port to your equipment through a USB3.0 port. It has a transfer rate of up to 1000Mbps, with which you can easily browse and transfer files.
  • ASUSTOR (AS-U2.5G ) USB-C 3.2 to 2.5-Gigabit Ethernet Base-T Adapter

    Easy network upgrades with 2.5-Gigabit Ethernet and USB.

    • Conveniently upgrade a NAS, laptop or desktop to 2.5-Gigabit Ethernet
    • Compatible with current network standards, including Gigabit and 100-Megabit connections.
    • Flexible compatibility. Compatible with ASUSTOR ADM 3.4 and above, Windows, macOS and Linux.
    USB Type-C
    The AS-U2.5G uses USB Type-C, making it easy to connect to your laptop or desktop.
     
     
    Integrated USB Cable
    The AS-U2.5G comes with an integrated a USB-C cable, making transport easy and reducing costs.
     
     
    Equipped With a 2.5GbE RJ45 Port
    Equipped with a 2.5GBASE-T RJ45 port, providing up to 2.5Gbps of speed using Cat 5e cables.
     
     
     
    Easily Comes With You
    The AS-U2.5G weighs only 49 g and is easily portable.
     
     
     
    USB powered
    The AS-U2.5G is powered directly from the USB port and does not require additional power. The AS-U2.5G is compatible with both USB Type-C ports and USB Type-A ports with an adapter. (Adapter sold separately)
     
     

     
    Fashionable
    Don’t be embarrassed bringing the AS-U2.5G with you! The aesthetic of the AS-U2.5G makes sure it does not look out of place in almost any situation with almost any device.

     

    Faster-Than-Ever Network Performance
    AS-U2.5G with the Nimbustor provides up to 2.5 times the speed of a Gigabit NAS setup.

    Upgrade Your Devices to 2.5-Gigabit Ethernet
    The AS-U2.5G can be easily plugged into a desktop or laptop to provide up to 2½ times the speed of Gigabit Ethernet. Combine the AS-U2.5G with a Nimbustor 2 and 4 to enable in-home storage at speeds indistinguishable from local hard drive storage. Supports 2.5-Gigabit speeds while also being backwards compatible with Gigabit and 100-Megabit networks, making the AS-U2.5G one of our most flexible network cards ever.

    Make Your NAS Fast Again
    The AS-U2.5G is able to upgrade your Gigabit-Enabled ASUSTOR NAS to 2.5-Gigabit speeds using the USB 3.2 Gen1 port. Supports ADM 3.4 and above.
     
    Note:
    Supports both USB Type-C and USB Type-A* with the use of an adapter. *USB Type-A adapter not included.
    Certain USB Type-C adapters exhibit an issue where plugging in a device a certain way will reduce USB speeds to 2.0 levels. Unplugging the device and flipping it should result in full speed USB operation and 2.5-Gigabit Ethernet.
     
     
     
    Simple Installation
    AS-U2.5G easily connects to Windows, Mac, Linux and ADM machines and is compatible with any network switch that supports 2.5-Gigabit connections. Cat 5e cables are fully supported and no additional drivers are required.

     

  • Dynamode ADSL Splitter (Microfilter)

    Microfilter & Splitter for ADSL Lines
     
    The Dynamode M-ADSL-FILTER-Y is a full UK standard spec ADSL Microfilter for BT exchanges within the UK.
     
    Featuring high-performance circuits to keep telephone conversations at high quality and at the same time maintain optimum ADSL line speeds all the way up to ADSL2 8 Mbps specifications.
     
     
    DC Characteristics
    All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective, the DC resistance should exceed 10 MW. 
     
     
     
    Typical Applications Include
     ADSL –Wireless LAN Router
     ADSL –Wireless Access Point
     ADSL –Wireless Bridge
     
  • Sandberg RJ11 to RJ11 Cable, 10 Metres, White, 5 Year Warranty

    Telephone RJ11-RJ11 10m
    Telephone cable with an RJ11 connector at each end. The cable can be used to connect a telephone to a wall socket with an RJ11 connector, for example.
  • Sandberg RJ11 to RJ11 Cable, 5 Metres, White

    Telephone RJ11-RJ11 5 m
    Telephone cable with an RJ11 connector at each end. The cable can be used to connect a telephone to a wall socket with an RJ11 connector, for example.
  • Sandberg USB-C Gigabit Network Adapter, Aluminium Case

    Sandberg USB-C Gigabit Network Adapter, Aluminium Case

    USB-C Gigabit Network Adapter

    • Aluminium case
    • USB-C interface (Compatible with USB 3.1 Gen. 1, USB 3.0, USB 2.0 and USB 1.1)
    • USB-C male connector
    • RJ45 female network connector
    • Half/full duplex 10/100/1000 Mbps operation
    • Self-adapting 10/100/1000 Mbps network
    • Support Full Duplex Flow Control (IEEE 802.3X)
    Sandberg USB-C to Network Converter gives you an easy and flexible network connection socket on any USB-C enabled computer.
  • Spire Dynamode ADSL Splitter (Microfilter), Tailed

    Microfilter & Splitter for ADSL Lines (Tailed)
     
    The Dynamode M-ADSL-FILTER-T is a full UK standard spec ADSL Microfilter for BT exchanges within the UK.
     
    Featuring high-performance circuits to keep telephone conversations at high quality and at the same time maintain optimum ADSL line speeds all the way up to ADSL2 8 Mbps specifications.
     
     
    DC Characteristics
    All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective, the DC resistance should exceed 10 MW. 
     
     
     
    Typical Applications Include
     ADSL –Wireless LAN Router
     ADSL –Wireless Access Point
     ADSL –Wireless Bridge
  • Spire Moulded CAT6e UTP Patch Cable, 3 Metres, Full Copper

    • 24 AWG.
    • Moulded connector.
    • Unshielded Twisted Pair (UTP).
    • Snagless RJ45.
    • T568B Wiring.
    • 3mtr.
    Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet and other network protocols that are backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat-5 and Cat-5e, Cat-6 features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250MHz.

Main Menu